Why Home Maintenance Advice from a Professional Can Save You Thousands

Owning a home comes with pride, comfort, and—let’s be honest—plenty of headaches. From leaky faucets to mysterious drafts, small maintenance issues can snowball into major expenses if left unchecked. That’s why savvy homeowners are turning to professional home inspectors—not just when buying or selling a home, but as trusted advisors for ongoing home care.

A home inspector is trained to see what most of us miss. They understand the hidden warning signs behind water stains, uneven floors, or unusual smells. With a professional eye, you can:

• Identify minor problems before they become major repairs
• Prioritize maintenance projects based on risk and cost
• Understand the lifespan of your home’s key systems
• Get peace of mind about the safety and efficiency of your home
• Targeted, Affordable Consulting

Not every homeowner needs a full inspection. Many hire inspectors for just an hour or two to focus on specific areas, such as:

• Heating and cooling systems
• Roofs, attics, and basements
• Plumbing or electrical issues
• Preparing for seasonal maintenance

This approach allows you to get expert advice without the cost of a full home inspection. Think of it as an investment that often pays for itself by preventing expensive repairs later. 

When booking a short home maintenance consultation:

• List your concerns – Whether it’s a drafty window or a slow-draining sink, make a list so nothing is overlooked.
• Ask about priorities – Inspectors can help you decide what needs attention immediately versus what can wait.
• Request written recommendations – Even a short report can guide future repairs and maintenance schedules.

Homeownership is a long-term commitment, and small problems compound fast. A professional home inspector isn’t just for buyers—they’re a resource for homeowners who want to protect their investment, save money, and enjoy their home with confidence. Getting a consultation from a home inspector can help you to solve any number of problems before they happen, or find solutions to problems that a contractor (who just wants to sell you the most expensive option) will be unwilling to help you with.

Invest an hour today—avoid a headache tomorrow.

 

 

 

Heating Inspections, and the Occasional Fire Hazard

Let’s be honest — most people don't really think or worry about their furnace until it’s -20°C, the wind sounds like a pack of wolves, and your thermostat’s giving you the silent treatment. That’s when panic sets in, and suddenly you’re googling “why isn't my furnace working?”

But here’s the thing: Furnaces rarely die suddenly. They grumble. They wheeze. They make noises that sound like a raccoon with a harmonica. And if you catch those warning signs early, you can usually avoid the whole “frozen pipes and emergency repair” situation.

During heating inspections, most home inspectors start with the basics:

• Is the heat exchanger cracked? Because a crack means carbon monoxide — and nobody wants that surprise. It could also be rusted, damaged, leaking, pitted, dirty and a host of other problems.

• Is the burner clean? (Half the time it looks like an unclean barbecue after a long weekend.)

• Are the filters fresh, or do they look like someone’s been storing pet hair in them since 2017?

• And, of course, are the vents breathing properly? Homeowners have an unwitting knack for blocking vents with furniture, boxes, rugs, old sporting equipment, toys — you name it. Heat’s not magic; It needs somewhere to go.

Home inspectors will often also check the flame itself. Yes, the flame. It should be blue, not orange, not yellow, not whatever “campfire mode” some people think looks cozy. Yellow means dirt or incomplete combustion, and incomplete combustion means trouble.

 

And don’t get me started on people who think yearly maintenance is a scam. Listen — a clean, tuned furnace runs better, lasts longer, and won’t fill your home with mystery smells (or kill you with carbon monoxide). It’s like brushing your teeth, but for your heating system.

So if you’re not sure the last time your furnace had a proper checkup (and “that one time Uncle Dave looked at it” doesn’t count), book a real inspection. That’s exactly the kind of thing you should do when you contact moffatinspections.ca to book a property inspection in Pickering or a home inspection in Ajax.

You also don't need to book a full home inspection. If you're only concerned about a few aspects of your property (eg. your heating and air conditioning) then you can book a home inspector and ask them to charge you a hourly rate for their consulting services.

And if you have any questions about maintenance, or how often you should replace a furnace (or AC unit), the home inspector can certainly help to address your concerns. 

 

Fireplaces & Chimneys: How Often to Clean ‘Em

There’s something magical about the first cold night of fall — the kind where you think, “Yeah, tonight’s the night. Let’s fire up the old fireplace.” 

You grab some logs, strike a match, sit back with your cocoa… and two minutes later, the whole living room smells like a campfire. Not the nice kind — the “uh-oh, open a window” kind.

That’s when it hits you: maybe it’s been a while since you had that chimney cleaned. Quite a while... Like maybe... Never.

Here’s the deal — fireplaces and chimneys aren’t just decorative holes in your wall. They’re working systems that move smoke, heat, and gases safely out of your home. And like any system, they need regular attention, especially if you plan on using them this winter.

The Once-a-Year Rule (and Why It’s Not Optional)

You’ll hear pros say: “Once a year, before heating season.” That’s not marketing talk — that’s survival advice. 

Even if you barely use the fireplace, creosote (that sticky, flammable gunk that coats the inside of your chimney) builds up slowly over time. One good fire, one spark in the wrong spot, and suddenly your relaxing evening turns into a visit from the fire department.

If you burn wood regularly — say a few times a week through winter — it’s smart to do a cleaning every year.

If you’re more of an “occasional fire on holidays” person, every two years might be fine, but only if the chimney cap, liner, and damper are in good shape and you’ve had a proper inspection confirming it.

What Actually Gets Cleaned (and Why You Care)

A full cleaning isn’t just sweeping out soot like a cartoon chimney sweep. It’s checking:

• Creosote buildup (that black tar-like stuff that loves to ignite).

• Animal nests — birds, squirrels, raccoons. I’ve seen it all. One time, I found a tennis ball and half a sandwich. Don’t ask.

• Chimney caps and crowns for cracks (because rain + soot = interior wall stains).

• Brickwork and mortar for damage. Small cracks can leak carbon monoxide or let in water. Both are bad news.

And for gas fireplaces, don’t assume you’re off the hook — vents still need checking, and spiders love to build webs inside pilot assemblies (don’t ask me why, they just do).

The Pre-Winter Inspection Routine

Before you light that first log, have the whole system inspected — even if you cleaned it last year. I can’t count how many people skip this and end up calling me mid-January with smoke stains above their mantle. That inspection can catch early signs of damage or blockage before they turn into chimney fires or smoke leaks.

So, if it’s been more than a year since your last cleaning, or if you can’t even remember when it was — that’s your answer right there. Get it done before the snow flies.

Go ahead, get that fireplace ready, roast your marshmallows, and enjoy the season — just make sure your chimney’s not plotting against you first.

Or alternatively...

Just tune in to a youtube video like the one below, put it on your TV, and turn the heat up in your home to create the illusion that you have a cozy fireplace. Less hassle, less to worry about. 

Heat Pump Inspections: Don’t Wait Until It’s Cold

When your heat pump starts acting up it’s rarely dramatic — no giant sparks or dramatic flames — just that slow decline: Longer run times, thermostat fiddling, or your energy bill climbing like it’s training for a marathon. Heat pumps run year-round (they’re your heater in winter and air-con in summer), so they don’t get the seasonal “rest” other systems do. That matters for how often you should check them.

How often should you get an inspection?

Short answer: at least once a year — preferably twice if the heat pump is your main system (spring and fall) so it’s tuned for both cooling and heating seasons. That’s the common industry recommendation and the one government and major manufacturers point to: annual minimum, biannual preferred for year-round use.

Why twice? Because the machine actually flips modes and loads change. A spring visit gets the system ready for cooling; a fall visit gets it ready for the heavy heating stretch. If you skip both, you may still be fine — until you’re not.

And no, you can't just ask the maintenance people or the home inspection company to send "Two guys instead of one". Having two people inspect it at the same time doesn't count as two separate inspections!

 

What we look for during a heat pump inspection (the important stuff)

Think of a professional inspection as a health check for the whole system — not just the outdoor box. Typical checks I run during a heat pump inspection:

• Filters and indoor airflow — dirty filters choke performance. Replace or clean them often (monthly to every 3 months depending on use/pets).

• Outdoor unit condition & clearance — remove leaves, snow, ice; ensure 30–60 cm clearance so airflow isn’t restricted. Clean fins/coils.

• Coils & refrigerant levels — dirty coils or low refrigerant make the unit struggle and drop efficiency; leaks need pro diagnosis.

• Defrost cycle & cold-weather performance — heat pumps have defrost cycles in winter; if it’s icing up and not defrosting properly, that’s a real problem.

• Electrical components — connections, contactors, capacitors, control wiring and safety controls get inspected and tightened/tested.

• Fan motors and belts (if applicable) — noise, wobble, or reduced RPMs are red flags.

• Thermostat and controls — verify accurate sensing and proper mode switching.

• Ductwork & vents (for ducted systems) — leaks, dirty ducts, or blocked vents cut efficiency and comfort.

I list those in the order I usually inspect them — the smallest fixes (filter, clearance) can often give the biggest immediate improvement.

Quick DIY checks you can do (before calling a pro)

• Replace or clean the filter. It’s the cheapest, most effective thing you can do.

• Walk the perimeter of the outdoor unit — clear away debris, leaves, and ice. Don’t use a pressure washer on delicate fins.

• Listen for odd noises (clunks, grinding, whining) and smell for burning or refrigerant (a chemical sweet/etheric smell). If you hear/smell those, shut it off and call a pro.

• Note run times: if the unit runs almost constantly and still doesn’t reach set point, that’s a clue something’s wrong.

When you should absolutely call a technician

• Ice that doesn’t go away after a defrost cycle.

• Strange electrical smells or visible sparking.

• Rapidly rising energy bills without lifestyle change.

• Unit short-cycling (turning on/off quickly) or failing to switch modes.
  These are not “I’ll check later” things — they need a pro. The industry guidance is clear: a professional tune-up prevents small problems becoming expensive replacements.

Costs & timing — what to expect

Average pro maintenance visits vary, but the cost is usually much lower than a major component replacement (compressor, coil, or a refrigerant repair). Many homeowners find a spring and fall service plan (two visits per year) worth the peace of mind and the energy savings. If you want rough numbers for budgeting, homeowner-facing guides publish typical maintenance visit ranges and what’s included.

A few real-world inspector notes (because I like telling short stories)

• A house where the “weak heat” problem was literally a plastic patio chair jammed against the return vent. Simple fix — huge effect.

• Outdoor units buried under three seasons of leaves. The owner swore they “only used it a little bit” — but the unit looked like it had been on a diet of mulch. Clearing the debris and a quick service visit brought it back to life.

Bottom line / what to do before winter

1. If it’s been more than a year since a professional looked at your heat pump, book an inspection (fall preferred for prepping heat mode). If your unit is the home’s primary HVAC, aim for twice a year. Early Spring and Early Autumn.

2. Do the quick DIY checks (filter, clearance) monthly or seasonally.

3. If you notice strange noises, loss of capacity, icing that won’t clear, or big bill jumps — call a pro right away.

If you want a proper heat pump inspection — the kind that covers the checklist above and gives you a clear, plain-English report — that’s something you can get from moffatinspections.ca. You will learn whether you need a quick fix, any preventative work or maintenance, and what’s worth budgeting for. No scare tactics, just the facts (and a little humour about the weather, because life is too short for boring HVAC talk).

If you're living in the Durham Region (Ajax, Pickering, Port Perry, Uxbridge) remember to book your home inspections or heat pump inspections from Moffat Inspections. 

 

Plumbing Inspections: The Silent Drip That Bankrupts You

Plumbing problems are sneaky. They don’t always announce themselves with a burst pipe and indoor rainstorm (though that does happen). Sometimes it’s just a slow drip behind a wall, a sweating pipe in a crawlspace, or a toilet that runs quietly for months, slowly adding zeros to your water bill.

Or worse, results in water damage and cracks in your foundation. The next time there is a big rainstorm the water bubbles up through the cracks and floods your basement.

A plumbing inspection isn’t glamorous — nobody brags about their perfectly sealed P-traps — but it’s one of those things that saves you money, time, and sanity. And yes, it’s absolutely worth doing before there’s a puddle in your basement that wasn’t there yesterday.

---

What a Plumbing Inspection Actually Covers

A proper plumbing inspection checks three big things:

1. Leaks — obvious and hidden. Home inspectors check under sinks, around toilets, near the water heater, and behind appliances. A tiny drip can cause big problems if it hits drywall or wood framing.

2. Water Pressure — too high and it strains/damages your fixtures; too low and you feel like you’re showering in a mist of disappointment.

3. Drainage — water should move fast and quietly. Gurgling, bubbling, or that swampy smell from a floor drain means something’s up.

A good home inspector will also look at the main shut-off valve, the water heater, and any visible supply lines — especially if they’re old copper or the dreaded polybutylene (the gray, brittle stuff from the 80s that loves to split open when you’re on vacation).

---

Most Common Issues

• Leaky fittings that someone tried to “fix” with Teflon tape and optimism.
• Corroded shut-off valves that no longer shut off anything.
• Cross-threaded connections on washing machine hoses — one burst and it’s game over for your laundry room.
• Sump pumps that haven’t been tested in years and quit the moment the power blinks during a storm.
• Water heaters on their last legs — rusted bottoms, expired anode rods, mystery noises that sound like a kettle boiling gravel (that sound is rusted flakes of metal inside the water heater).

 

 

Uncommon Issue: Some silly electrician puts an electrical socket in a sink.

 

 

When to Schedule a Plumbing Inspection

You should have your plumbing inspected once a year, especially in older homes or if you’ve had recent foundation movement or water pressure fluctuations. It’s also a must before:

• Buying or selling a home.

• Renovating a bathroom or kitchen.

• Installing a new appliance that connects to water. 

And definitely before winter, if your home has any history of frozen pipes. A quick inspection can reveal uninsulated lines or drafty crawlspaces that could cause a disaster come January when the pipes burst.

Bonus: If your home floods (for whatever reason) you should get a full home inspection in order to check what all has been damaged. The plumbing could be just the tip of the iceberg.

---

What You Can Do Between Inspections

• Peek under sinks once in a while. If you see a drip, white crust, or dark patch — don’t ignore it.

• Test your shut-off valves. If you can’t turn them easily by hand, they’ll fail when you need them most.

• Drain a few gallons from your water heater once a year to flush out sediment. It’s simple and extends its life.

• Make sure sump pumps actually run — pour water into the pit until it clicks on.

---

The Bottom Line

Plumbing issues are like dental problems — the longer you ignore them, the more expensive they get. An inspection is your yearly checkup, catching the tiny problems before they become major repairs.

And because water damage from leaky pipes can cause problems with your home's foundation, wiring and structure, the expenses can add up very quickly.

At moffatinspections.ca, which we recommend if you are looking for any kind of home inspection in Ajax, the home inspector takes the time to track down those hidden risks — the leaks behind walls, the valves that won’t turn, the drains that gurgle at night — and knowing about these problems before hand let's you fix them before they flood your basement.